The Precision Cartridge Filter System is engineered for continuous particulate removal in industrial fluid loops and parts washing lines. By removing suspended chips, metal fines, and contaminants down to sub-micron levels, this unit extends the operational lifecycle of process baths, protects downstream pumps from abrasive wear, and stabilizes fluid quality in closed-loop systems.
Key Features
Multi-Cartridge Housing Layout: Accommodates single or multiple standard industrial filter cartridges (DOE or Code 7 configuration) to match varying flow capacity demands.
V-Band or Swing-Bolt Closure: Heavy-duty cover retention mechanism enables rapid tool-free or low-tool element replacement, reducing maintenance downtime.
Differential Pressure Monitoring Ports: Integrated 1/4" NPT upstream and downstream taps allow direct installation of pressure gauges or differential pressure switches to track element loading.
Precision Sealing Integrity: Precision-machined O-groove seat geometry prevents fluid bypass and secures sealing under cyclic pressure fluctuations.
Drain and Vent Provisions: Standard bottom drain port ensures complete fluid evacuation during servicing; top vent valve releases trapped air upon startup.
Technical Specifications & CAD Dimensional Drawing
|
Parameter |
Specification |
|
Housing Material |
Standard SS304; optional SS316L for corrosive environments |
|
Compatible Cartridge Length |
10 inches, 20 inches, 30 inches, 40 inches |
|
Cartridge Style |
Double Open Ended (DOE) or 226/Fin (Code 7) |
|
Maximum Operating Pressure |
1.0 MPa (150 psi) |
|
Maximum Operating Temperature |
95°C (dependent on gasket material) |
|
Connection Size Range |
DN25 to DN100 (Flanged or NPT threaded) |
|
Filtration Efficiency Rating |
0.5 micron to 100 micron (nominal/absolute) |
|
Gasket / O-Ring Options |
EPDM, Viton, PTFE-encapsulated |
|
Surface Finish |
Bead-blasted exterior; electro-polished wetted surfaces available |
Applications
Industrial Parts Washers: Continuous filtration of wash and rinse water in multi-stage spray or ultrasonic cleaning machines.
Metalworking Coolants: Removal of swarf and grinding fines from synthetic and semi-synthetic machining fluids.
Surface Treatment Lines: Bath purification prior to phosphating, electroplating, or passivation.
General Process Water: Suspended solid reduction in industrial utility and recirculation loops.
Working Principle
Process fluid enters the inlet port of the filter vessel and fills the outer shell cavity. Driven by system pressure, liquid flows radially inward through the walls of the filter cartridge. Particulates and suspended solids are trapped on the outer surface or within the depth matrix of the filter media. Clarified filtrate collects in the central core of the cartridges and exits through the bottom outlet port. As solids accumulate, differential pressure across the vessel rises, signaling the need for cartridge replacement once the terminal pressure drop is reached.
Customization Options
Port Configurations: Flange standards (ANSI, DIN, JIS) and custom inlet/outlet orientation (side-in/bottom-out or inline).
Surface Treatment: Mechanical interior polish (Ra ≤ 0.4 μm) or passivated pickled finish for high-purity duties.
Skid Integration: Pre-piped assemblies featuring dual-vessel duplex switching manifolds for continuous 24/7 operation without process interruption.
Instrumentation Packages: Factory-mounted differential pressure gauges, air release valves, and drain ball valves.
FAQ
Q: How do I determine when to replace the filter cartridges?
A: Monitor the differential pressure (DP) across the inlet and outlet ports. Replace cartridges when the pressure drop exceeds the manufacturer's recommendation (typically 0.15 to 0.2 MPa above clean pressure drop) or when flow rate drops noticeably.
Q: Can this system handle acidic or alkaline cleaning chemicals?
A: Yes, provided correct material pairings are selected. SS304 suits neutral aqueous solutions, while SS316L combined with Viton or PTFE gaskets is required for aggressive chemical baths or high-chloride rinse water.
Q: What is the standard lead time for non-standard flange connections?
A: Custom engineering drawings are verified within 3 business days; standard fabrication and pressure testing require 15 to 20 business days.
Q: Are differential pressure switches included as standard supply?
A: Pressure gauges and DP switches are offered as optional modular accessories depending on system automation requirements.
Request a Quote
To configure a Precision Cartridge Filter System matching your operating parameters, please provide the following details to our technical sales team:
Flow Rate: (e.g., m³/h or GPM)
Operating Pressure & Temperature:
Fluid Type & Chemical Composition:
Target Filtration Micron Rating:
Required Housing Material & Connection Type:
Submit your specification sheet or inquiry directly to our engineering desk for a formal proposal and CAD drawing package.
Hot Tags: precision cartridge filter system, China precision cartridge filter system manufacturers, suppliers, factory


