The Automatic Water Chlorination System is a skid-mounted chemical dosing unit designed for continuous disinfection in municipal water treatment plants, industrial water systems, and wastewater treatment facilities. It combines chemical metering pumps, storage tanks, residual chlorine analyzers, flow monitoring instruments, and a PLC control panel to regulate disinfectant injection.
The system is primarily configured for liquid chlorine-based disinfectants, such as sodium hypochlorite solutions. Depending on the selected control arrangement, chemical dosing can operate through flow-proportional control or residual chlorine feedback. This allows operators to adjust the dosing rate according to process water flow and measured chlorine concentration.
The integrated assembly provides a centralized arrangement for chemical storage, metering, monitoring, and control. It is suitable for water treatment projects requiring continuous chemical injection and automated residual chlorine management.
Key Features
Automatic Dosing Control: PLC-based control adjusts metering pump output according to water flow signals or residual chlorine measurements.
Online Chlorine Monitoring: Residual chlorine analyzers provide measurement signals for monitoring and automatic dosing control.
Chemical-Compatible Materials: PVC, PVDF, HDPE, FRP, and 316L stainless steel are available for different wetted components, subject to chemical compatibility.
Skid-Mounted Assembly: Pumps, tanks, piping, valves, and control equipment are arranged on a common base frame for project installation.
Duty-Standby Pump Configuration: Two dosing pumps can be arranged for operating and standby service, with automatic changeover when the control system supports this function.
PLC and HMI Control: The control panel provides operating status, parameter adjustment, alarm monitoring, and communication interfaces for plant automation.
Technical Specifications
|
Technical Parameter |
Specification |
|
System Type |
Automatic skid-mounted chlorination dosing system |
|
Disinfectant |
Sodium hypochlorite solution |
|
Dosing Capacity |
0.5–500 L/h per pump |
|
Operating Pressure |
0.3–1.0 MPa |
|
Control Modes |
Flow-proportional / Residual chlorine feedback / Manual |
|
Free Chlorine Measurement |
0–20 mg/L |
|
pH Measurement |
0–14 |
|
Signal Input |
4–20 mA |
|
Communication |
Modbus RTU / Modbus TCP |
|
Power Supply |
380 V, 50 Hz, 3-phase |
|
Chemical Tank Material |
HDPE / FRP |
|
Chemical Tank Capacity |
100–3,000 L |
|
Skid Frame Material |
Carbon steel / SS304 |
|
Electrical Enclosure |
IP55 / IP65 |
|
Pump Arrangement |
Single pump / Duty-standby dual pumps |
Applications
Municipal Drinking Water Treatment: Sodium hypochlorite dosing for primary disinfection and residual chlorine management in water treatment plants and distribution systems.
Industrial Cooling Water: Chemical injection for controlling microbial growth and biological fouling in open recirculating cooling water systems.
Wastewater Treatment: Final-stage chlorination of treated effluent before discharge or designated reuse processes.
Desalination Facilities: Chlorine dosing for pretreatment applications, with downstream dechlorination where required to protect reverse osmosis membranes.
Working Principle
The system operates through chemical metering and process monitoring. Water flow instruments transmit operating signals to the PLC, while an online residual chlorine analyzer measures chlorine concentration in the treated water. The analyzer can use an appropriate sampling arrangement, including an inline or bypass flow-cell configuration.
The PLC compares the measured values with the programmed control targets. Under flow-proportional control, pump output changes according to the incoming water flow. Under residual chlorine feedback control, the controller adjusts dosing output according to the difference between the measured and target chlorine concentrations.
The metering pump transfers disinfectant from the chemical storage tank through the dosing pipeline. A back-pressure valve maintains the required discharge-line pressure, while an injection valve introduces the chemical into the process pipeline and helps prevent reverse flow. The injected solution mixes with the process water before downstream chlorine measurement.
Customization Options
Chemical Storage: HDPE or FRP tanks with capacities from 100 L to 3,000 L.
Pump Configuration: Solenoid-driven or motor-driven metering pumps, with single-pump or duty-standby arrangements.
Wetted Materials: PVC, PVDF, or 316L stainless steel selected according to disinfectant concentration and operating conditions.
Monitoring Instruments: Residual chlorine, pH, ORP, turbidity, and conductivity instruments.
Control Integration: PLC, HMI, 4–20 mA signals, and supported Modbus communication interfaces.
Skid Design: Carbon steel or SS304 frames with project-specific piping and equipment layouts.
FAQ
Q: Which disinfectants can the system handle?
A: The system is configured for liquid disinfectant dosing, including sodium hypochlorite solutions. Wetted materials and pump components must be selected according to the chemical concentration and temperature.
Q: Can the system connect to an existing SCADA network?
A: Yes. The control panel can support Modbus RTU or Modbus TCP communication when the corresponding PLC and communication modules are installed.
Q: How is dosing accuracy maintained?
A: Dosing performance depends on pump selection, calibration, operating pressure, chemical properties, and control signal settings. Periodic pump inspection and analyzer calibration are required.
Request a Quote
To select an appropriate Automatic Water Chlorination System, please provide your water flow rate (m³/h), target residual chlorine concentration (mg/L), disinfectant type and concentration, operating pressure, and required tank capacity.
You can also submit your process flow diagram, pipeline connection details, and electrical requirements. These details help determine the dosing pump capacity, material selection, instrument configuration, and PLC control arrangement for your water treatment project.
Hot Tags: automatic water chlorination system, China automatic water chlorination system manufacturers, suppliers, factory


