Industrial UV Water Sterilizer

Industrial UV Water Sterilizer

The Industrial UV Water Sterilizer uses ultraviolet-C (UV-C) radiation to inactivate microorganisms in continuous water treatment processes. It consists of a stainless steel reactor chamber, low-pressure high-output (LPHO) UV lamps, protective quartz sleeves, and an electrical control system.
Send Inquiry
Description

The Industrial UV Water Sterilizer uses ultraviolet-C (UV-C) radiation to inactivate microorganisms in continuous water treatment processes. It consists of a stainless steel reactor chamber, low-pressure high-output (LPHO) UV lamps, protective quartz sleeves, and an electrical control system.
The lamps emit UV-C radiation at a peak wavelength of 254 nm. As water passes through the reactor, UV energy penetrates microbial cells and damages their genetic material, preventing replication. The process treats water without adding chemical disinfectants or intentionally changing its pH and mineral composition.
The reactor is available in 304 or 316L stainless steel for integration into municipal, industrial, food processing, and other water treatment systems. Treatment capacity and UV dose are determined by flow rate, UV transmittance (UVT), lamp output, and reactor design.

 

Key Features

 

Stainless Steel Reactor: Available in SS304 and SS316L, with pickled and passivated surfaces. Internal surface finish and pressure ratings can be specified according to project requirements.

UV-C Lamp Assembly: Low-pressure high-output amalgam lamps operate at a peak wavelength of 254 nm. Lamp service life is rated at 9,000–12,000 hours according to the original lamp specifications.

Quartz Sleeve Protection: High-purity quartz sleeves isolate the lamps from direct water contact while transmitting UV-C radiation into the treatment chamber.

Industrial Control System: Digital lamp-hour counters, operating status indicators, alarm outputs, and electrical fault monitoring support routine operation.

Sleeve Cleaning Options: Manual or automatic mechanical wiping systems are available for installations requiring regular quartz sleeve cleaning.

 

Technical Specifications

 

Parameter

Specification

Product Type

Industrial UV Water Sterilizer

UV Technology

Low-Pressure High-Output UV-C

UV Wavelength

254 nm

Target UV Dose

30 mJ/cm²

Reactor Material

SS304 / SS316L

Surface Treatment

Pickling and Passivation

Maximum Operating Pressure

1.0 MPa

Lamp Service Life

9,000–12,000 hours

Quartz Sleeve

High-Purity UV-Transmitting Quartz

Sleeve Cleaning

Manual / Automatic Wiper

Control Enclosure

IP54 / IP65

UV Monitoring

Optional UV Intensity Sensor

Electrical Communication

Optional Modbus RTU

Pipe Connection

ANSI / DIN / JIS Flange; BSP / NPT Thread

 

Applications

 

Municipal Water Treatment: Disinfection of drinking water and treated wastewater in municipal treatment facilities and distribution systems.
Food and Beverage Processing: UV treatment of process water, ingredient water, bottle washing water, and suitable final-rinse water streams.
Pharmaceutical and Semiconductor Water Systems: Microbial control in compatible pretreatment and water distribution loops. Dedicated 185 nm and 254 nm UV oxidation equipment can be used for TOC reduction.
Aquaculture: Treatment of recirculating water to reduce susceptible microorganisms passing through the UV reactor.
Industrial Cooling Water: Side-stream UV treatment in cooling water circuits. UV treatment does not provide a persistent disinfectant residual throughout the cooling system.

 

Working Principle

 

Water enters the reactor and flows around quartz sleeves containing UV-C lamps. The emitted 254 nm radiation reaches microorganisms suspended in the water and damages their DNA or RNA. This prevents affected microorganisms from reproducing.
The treated water exits the reactor without chemical disinfectant addition. UV performance depends on water clarity, UVT, hydraulic conditions, lamp output, and exposure conditions. Appropriate pretreatment may be required when suspended solids, iron, or other UV-absorbing substances interfere with radiation transmission.

 

Customization Options

 

Reactor configurations include SS304 or SS316L construction, manual or automatic sleeve wipers, UV intensity monitoring, and different inlet and outlet orientations. Electrical systems can incorporate Modbus RTU communication for PLC and SCADA integration. Flange dimensions and connection standards can be selected to match project piping requirements.

 

FAQ

 

Q: How often should UV lamps be replaced?

A: The stated lamp service life is 9,000–12,000 operating hours. Replacement intervals should follow the lamp manufacturer's specifications and the system's UV intensity monitoring results.

Q: What water quality affects UV disinfection?

A: UVT at 254 nm, suspended solids, iron, turbidity, and other UV-absorbing substances influence treatment performance. Minimum UVT should be established during system sizing.

Q: Does UV treatment produce chemical disinfection byproducts?

A: Conventional 254 nm UV disinfection does not require chlorine addition and does not produce THMs or HAAs through conventional chlorination reactions.

Q: How are quartz sleeves cleaned?

A: Manual or automatic mechanical wipers can remove deposits. Chemical cleaning may also be used according to the sleeve material, contaminant type, and cleaning procedure.

 

Request a Quote

 

For equipment selection, provide the required flow rate (m³/h), minimum UVT (%), target UV dose (mJ/cm²), operating pressure, water source, inlet and outlet dimensions, and target microbial reduction level. Technical drawings, reactor dimensions, and a project quotation can then be prepared based on the supplied operating conditions.

Hot Tags: industrial uv water sterilizer, China industrial uv water sterilizer manufacturers, suppliers, factory

Send Inquiry
Send Inquiry