The High-Flow Industrial Water Softener is an ion exchange water treatment system designed to remove calcium and magnesium ions from industrial water supplies. Using sodium-form strong acid cation resin, the system reduces water hardness before water enters boilers, cooling systems, reverse osmosis units, and industrial production processes.
Available in single-vessel and duplex alternating configurations, the system accommodates industrial water treatment requirements with continuous service flow rates of 10–50 m³/h per vessel. In duplex operation, two resin vessels alternate between service and regeneration, allowing one vessel to supply softened water while the other undergoes regeneration, provided the operating vessel meets the required system flow.
Key Features
High-Flow Ion Exchange: Strong acid cation resin exchanges calcium and magnesium ions for sodium ions to reduce feedwater hardness.
Duplex Alternating Operation: Two vessels alternate between service and regeneration to maintain softened water supply during regeneration.
FRP Pressure Vessel Construction: PE-lined FRP vessels provide a corrosion-resistant wetted surface and structural pressure containment.
Automatic Regeneration: Multi-port control valves manage backwashing, brine injection, slow rinsing, fast rinsing, and brine tank refill.
Industrial Control Options: Volumetric or time-based regeneration controls support different operating schedules and water consumption patterns.
Technical Specifications
|
Parameter |
Specification |
|
Model Series |
HFS-I Series |
|
System Configuration |
Single Tank / Duplex Alternating |
|
Service Flow Rate |
10–50 m³/h per vessel |
|
Operating Pressure |
0.20–0.60 MPa |
|
Maximum Vessel Pressure Rating |
1.0 MPa |
|
Operating Temperature |
5–50°C |
|
Maximum Raw Water Hardness |
8.0 mmol/L |
|
Target Outlet Hardness |
≤0.03 mmol/L |
|
Maximum Feedwater Turbidity |
5 NTU |
|
Maximum Free Chlorine |
0.1 mg/L |
|
Vessel Construction |
PE Inner Liner with FRP Outer Shell |
|
Resin Type |
Strong Acid Cation Exchange Resin, Sodium Form |
|
Control Valve |
Automatic Multi-Port Valve |
|
Valve Materials |
Noryl / Lead-Free Brass |
|
Power Supply |
220V / 50Hz or 110V / 60Hz |
Applications
Boiler Feedwater Pretreatment: Reduces calcium and magnesium hardness before downstream boiler water treatment to control hardness-related scale formation on heat transfer surfaces.
Cooling Tower Makeup Water: Reduces hardness in makeup water to help control calcium-based scale deposits in cooling tower systems.
Reverse Osmosis Pretreatment: Lowers feedwater hardness to reduce the risk of calcium and magnesium scale formation on RO membranes. Additional filtration may be required for suspended solids, iron, silica, and other contaminants.
Textile and Dyeing Facilities: Supplies softened utility water for dye bath preparation, equipment washing, and textile processing operations where water hardness affects process consistency.
Food and Beverage Facilities: Provides softened water for equipment cleaning, container washing, and auxiliary cooling systems.
Working Principle
The system uses sodium-cycle ion exchange to remove hardness from incoming water.
Service Cycle: Raw water passes through the resin bed. Calcium and magnesium ions are exchanged for sodium ions, producing softened water.
Backwash: Water flows upward through the resin bed to loosen resin beads and remove accumulated suspended particles.
Brine Draw and Slow Rinse: Sodium chloride solution enters the vessel and restores the resin to its sodium form. Displaced calcium and magnesium ions are discharged through the drain.
Fast Rinse and Refill: Fresh water flushes residual brine from the resin bed. The brine tank is refilled for the next regeneration cycle.
In duplex systems, the control sequence switches service between the two vessels according to available exchange capacity and programmed regeneration settings.
Customization Options
Pressure Vessel Materials: FRP vessels or 304/316L stainless steel pressure vessels for different installation and operating requirements.
Automatic Valve Systems: Top-mounted or side-mounted valves, with PLC-controlled pneumatic or electric butterfly valve assemblies for larger installations.
Skid-Mounted Systems: Integrated steel frames with PVC, stainless steel, or PPR connecting pipework.
Industrial Communication: Modbus RTU, Modbus TCP, and PROFIBUS interfaces for integration with plant control and SCADA systems.
Engineering Documentation: 2D equipment drawings and 3D STEP files for layout planning and skid integration.
FAQ
Q: What raw water conditions are suitable for this system?
A: The stated inlet limits are hardness up to 8.0 mmol/L, turbidity below 5 NTU, and free chlorine below 0.1 mg/L. Additional pretreatment may be necessary when raw water contains excessive suspended solids, iron, or oxidizing agents.
Q: Does softened water have lower TDS?
A: No. Ion exchange replaces calcium and magnesium ions with sodium ions. The process reduces hardness but does not function as a general dissolved-solids removal treatment.
Q: How is the equipment sized?
A: Sizing requires service flow rate, daily water consumption, raw water hardness, target outlet hardness, and operating hours. These values determine resin volume, exchange capacity, and regeneration frequency.
Q: Can the system supply water continuously?
A: Duplex alternating models can maintain service during regeneration when the operating vessel has sufficient capacity to meet the required flow rate.
Request a Quote
For equipment selection and system sizing, please provide:
- Required continuous and peak flow rates (m³/h or GPM).
- Raw water analysis, including hardness, turbidity, iron, and free chlorine.
- Required outlet water hardness.
- Daily water consumption and operating hours.
- Available inlet pressure and installation space.
- Preferred single-tank or duplex configuration.
- Control system and electrical supply requirements.
Submit your water analysis report and project specifications to request an equipment configuration, technical proposal, and quotation.
Hot Tags: high-flow industrial water softener, China high-flow industrial water softener manufacturers, suppliers, factory


