Product Overview
Our industrial reverse osmosis systems are engineered for continuous-duty separation of dissolved salts, organics, and colloidal silica from raw municipal or well feedwaters. Built on structural carbon-steel or 304/316L stainless steel skids, each unit integrates pre-filtration, high-pressure pumping, spiral-wound polyamide membrane elements, and PLC-based electrical controls into a pre-piped, pre-wired assembly.
Units are hydro-tested and factory-configured prior to shipment to minimize on-site installation time and piping labor for industrial water treatment plants, power facilities, and manufacturing plants.
-
Industrial Reverse Osmosis System· Stable 6m³/h high-purity water output, ≥99% salt rejection, reliable industrial-grade quality.view more
· Skid-mounted integrated design, quick installation, continuous operation.
· Corrosion-resistant, energy-saving, PLC... -
Commercial Reverse Osmosis System· 4–5T/H high flow, 99% salt rejection, pure water meets global drinking standards.view more
· Fully automatic, multi-source compatible, stable for industrial & commercial use.
· Fully customizable, global voltage, certified &... -
Skid-mounted Reverse Osmosis System· Pre-assembled skid design for fast installation & quick startup.view more
· 99% salt rejection with premium components for stable performance.
· Fully automatic operation, customizable & globally certified. -
RO Purified Water System· Fully automatic PLC control, unattended operation.view more
· High salt rejection & extended membrane life, low maintenance cost.
· Full 304 stainless steel, customizable for all industries. -
RO-EDI Combination Water System• Stable ultra-pure water output, conductivity ≤10μS/cm, meeting industrial high standards.view more
• ≥70% recovery & ≥99% rejection, greatly reduce water & power cost.
• Fully automatic, durable, multi-industry applicable &...

Structural Skid Framework: Constructed from heavy-wall structural carbon steel protected with a two-part industrial epoxy coating, or fully passivated 304/316L stainless steel for corrosive environments.
High-Energy Efficiency Pumping: Utilizes vertical multistage centrifugal pumps (Grundfos/Danfoss) coupled with IE3/IE4 high-efficiency motors to optimize specific energy consumption per cubic meter of permeate.
Precision Pre-Filtration Array: Incorporates multi-cartridge bag or cartridge housings (polypropylene or stainless steel 316) utilizing 5-micron filters to protect high-pressure pump internals and membrane feed channels from suspended solids.
Instrumentation and Monitoring: Integrated online instrumentation includes electromagnetic flow meters, conductivity/resistivity sensors, pressure transmitters, and pH monitors wired to a centralized NEMA 4X / IP66 control panel.
Clean-In-Place (CIP) Subsystem: On-skid CIP tank, dedicated chemical pump, and basket strainer designed for periodic membrane recovery using low-pH and high-pH cleaning formulations without external plant disruption.
Technical Specifications
|
Parameter |
Standard Industrial Experience Specification Range |
|
Permeate Flow Rate |
5 cubic meters per hour to 150 cubic meters per hour (Higher capacities via multi-train parallel skids) |
|
Nominal Salt Rejection |
98.5 percent to 99.7 percent (Depending on membrane selection and feed chemistry) |
|
System Recovery Rate |
75 percent to 85 percent (Adjustable via concentrate recycle loops) |
|
Membrane Elements |
8-inch spiral-wound polyamide composite (Dow Filmtec, Hydranautics, or Toray) |
|
High-Pressure Pump |
Vertical multistage centrifugal (SS316 wetted parts; operating pressure up to 1.6 MPa) |
|
Pressure Vessels (Membrane Housings) |
FRP (Fiberglass Reinforced Plastic) conforming to ASME Section X standards |
|
Low-Pressure Piping |
Schedule 80 UPVC / Schedule 10 SS304/SS316L |
|
High-Pressure Piping |
Super Duplex Stainless Steel (2205) or 316L seamless tubing |
|
Control System and Compliance |
Siemens S7-1200 / Allen-Bradley Micro850 PLC with 7-inch HMI; Electrical panel built to CE / UL / CSA standards |
|
Power Supply |
380V/415V/480V, 3-Phase, 50/60 Hz (Custom voltages available upon request) |
Boiler Feedwater Preparation: Supplying demineralized makeup water to high-pressure utility and power generation boilers to prevent scaling and turbine blade corrosion.
Electronics and Semiconductor Manufacturing: Providing high-purity primary water feeds for ultra-pure water (UPW) polishing loops.
Food and Beverage Processing: Producing ingredient-grade water meeting strict microbiological and chemical standards for beverage dilution and bottle rinsing.
Chemical and Pharmaceutical Processing: Generating purified water for equipment rinsing, chemical batch makeup, and general utility usage.
Municipal and Industrial Desalination: Treating brackish groundwater or surface water with Total Dissolved Solids (TDS) ranging from 2,000 to 10,000 mg/L.


Every industrial facility presents unique water chemistry challenges. We configure systems based on your raw water analysis report (SDI, TDS, silica, hardness, and TOC). Custom engineering options include:
Anti-scalant and Acid Dosing Systems: Automated chemical metering skids installed upstream of RO membranes.
Dual-Pass RO Configurations: Required for applications demanding permeate conductivity below 5 micro-Siemens per centimeter.
Ex-proof (ATEX / Class I Div 2) Electricals: For hazardous chemical or refinery plant installations.
Material Upgrades: Substitution of wetted metallic parts with Titanium or 254SMO for high-chloride or high-salinity environments.
Quality Assurance and Compliance
Manufacturing verification ensures long-term operational reliability and code compliance before equipment leaves our fabrication facility:

Design and Regulatory Compliance
Pressure vessels and system frameworks are engineered and manufactured in strict compliance with ASME Section VIII / Section X guidelines and electrical panels adhere to CE/UL norms to ensure smooth international customs clearance and local site commissioning.
Factory Acceptance Testing (FAT)
Fully assembled skids undergo dry/wet functional testing of electrical panels, instrumentation loop checks, and pump dry-run protection validation. Documentation package includes Material Test Reports (MTRs), Weld Logs, and Instrument Calibration Certificates.


Welding Inspection
All stainless-steel piping joints undergo Argon arc welding (TIG) with internal purge, followed by weld pickling and passivation.
Pressure Testing
Pressure vessels and high-pressure manifolds undergo hydrostatic testing at 1.5 times maximum operating pressure for 30 minutes.

Project References and Case Studies
Project 1: 50 cubic meters per hour Boiler Feedwater System for a Power Plant (Middle East)
Feedwater: Deep well brackish water (TDS = 4500 mg/L).
Configuration: Single-pass RO with intermediate decarbonator and EDI polishing.
Result: Continuous operation maintaining permeate conductivity below 10 micro-Siemens per centimeter at an 80 percent recovery rate over 3 years of runtime.
Project 2: 100 cubic meters per hour Process Water Treatment for a Chemical Park (Southeast Asia)
Feedwater: River surface water with high organic loading.
Configuration: Ultrafiltration (UF) pretreatment feeding duplex RO skids.
Result: SDI consistently maintained below 2.0, extending membrane chemical cleaning intervals beyond 6 months.

FAQ

Request a Technical Quotation
To generate an accurate system design and commercial proposal, please provide the following parameters to our engineering team:
Raw Water Source and Complete Water Analysis Report (TDS, ions, hardness, silica, SDI, TOC)
Required Permeate Flow Rate (cubic meters per hour or GPM)
Required Permeate Quality (Maximum allowable conductivity or TDS)
Available Site Utilities and Space Limitations
We're well-known as one of the leading industrial ro equipment manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy bulk industrial ro equipment made in China here from our factory. Customized orders are welcome.
RO Water Purification System, Commercial Reverse Osmosis System, RO DI Purification System
