Product Overview

 

The ROP-IND series industrial reverse osmosis equipment provides high-purity water generation for continuous manufacturing processes. Built on a structural carbon steel or 304 stainless steel skid, each system integrates multi-stage pre-filtration, high-pressure pump assemblies, spiral-wound polyamide composite membranes, and automated PLC control.


Successfully deployed in over 40 industrial facilities across North America and Europe since 2022, the unit reduces total dissolved solids (TDS) by 98.5% to 99.4%, delivering consistent water quality for industrial utilities and production lines. Systems are configured based on raw water chemistry, required recovery rates, and daily volume demands.

 

 
  • Commercial RO Purified Water System
    • 1000L/H high output, 98% salt rejection, stable for commercial water supply.
    • Smart monitoring & auto-protection, easy operation, low maintenance cost.
    • Certified factory, customizable, global one-stop export service.
    view more
  • Industrial RO Water Purification System
    · Industrial dual‑membrane purification, 98% salt rejection, stable compliant water output.
    · Fully automatic intelligent control, water & power saving, low operating cost.
    · Flexible customized capacity, adaptable to...
    view more
  • Automatic RO Water Purifier
    · Fully automatic operation, zero manual intervention.
    · Multi-stage filtration, stable pure water output.
    · Flexible customization, wide application scenarios.
    view more
  • Livestock Farm RO Water Purifier
    · 97% deep purification ensures drinking-grade water, reducing livestock disease rates.
    · SUS304 stainless steel, rust-proof & stable in harsh farm environments.
    · Fits well/tap water, low-maintenance design saves...
    view more
  • River Water RO Purification System
    · Direct river water purification with 99% salt rejection for safe drinking & production.
    · Heavy-duty stainless steel, modular design, stable & low maintenance.
    · Certified factory direct supply, custom solutions &...
    view more
 
Automatic RO Water Purifier

 

Key Features

Skid-Mounted Modular Assembly: Frame, piping, vessels, and electrical panels are pre-assembled and hydro-tested prior to shipment, minimizing on-site installation time.


Energy-Efficient High-Pressure Hydraulics: Utilizes vertical multistage centrifugal pumps paired with variable frequency drives (VFD) to match operating pressure demands and lower power consumption.


Automated Flush and Cleaning Cycle: Integrated clean-in-place (CIP) connection ports and automated flush sequences reduce membrane scaling and organic fouling.


Corrosion-Resistant Process Piping: Low-pressure lines utilize Schedule 80 UPVC; high-pressure concentrate and feed lines utilize 304 or 316L stainless steel with sanitary welds.


Instrumentation & Real-Time Monitoring: Inline sensors continuously measure permeate conductivity, system pressure, pH, and flow rates, feeding data directly to the central PLC/HMI interface.

 

Technical Specifications
 

Parameter

Specification Range

Unit / Standard

Permeate Capacity

5 - 100

m3/hr (22 - 440 GPM)

Salt Rejection Rate

>= 98.5% - 99.4%

Nominal (tested at 25°C)

System Recovery Rate

70% - 82%

Configurable per feed water analysis

Max Feed TDS Limit

<= 2000

mg/L (PPM)

Operating Pressure

1.2 - 2.1

MPa (170 - 300 PSI)

Membrane Element Type

4-inch / 8-inch Spiral-Wound

Polyamide Composite (FilmTec / Toray equivalent)

High-Pressure Pump

Vertical Multistage Centrifugal

SS304/SS316 wetted parts, IE3 efficiency motor

Pre-Filtration

5-micron Multi-Round Cartridge

Polypropylene (PP) melt-blown

Control System

Siemens S7-1200 PLC + 7-inch HMI

Modbus TCP / Ethernet IP communication

Power Supply

380V/415V/480V, 50/60Hz, 3-phase

Custom voltage available upon request

 

 

Applications & Industries

Boiler Feed Water: Supplying low-TDS makeup water to high-pressure steam boilers to prevent scale formation and turbine blade corrosion.


Food & Beverage Processing: Ingredient water preparation, container rinsing, and clean-up water generation meeting sanitary guidelines.


Pharmaceutical Pre-Treatment: Feeding purified water (PW) distillation stills and multi-effect water generation systems.


Electronics Manufacturing: Providing primary demineralized water for component rinsing and printed circuit board fabrication.


Chemical & Automotive Surface Treatment: Rinsing baths and bath makeup for electroplating, painting, and metal finishing lines.

Automatic RO Water Purifier factory

 

Customization Options
 

We engineer systems to match specific plant utility constraints and water chemistry profiles. Customization parameters include:

Industrial RO Water Purification System
 

Metallurgy Upgrades

Upgrading wetted piping and pressure vessels from 304 stainless steel to 316L or Super Duplex stainless steel for high-chloride or corrosive environments.

 

Antiscalant & Chemical Dosing Skids

Integrated metering pumps and chemical tanks for pH adjustment, sodium bisulfite (dechlorination), or antiscalant injection.

Industrial RO Water Purification System best
Industrial RO Water Purification System factory
 

Dual-Pass RO Configuration

Addition of a second-pass RO stage for applications requiring permeate conductivity below 1.0 uS/cm.

 

Enclosure Options

Weatherproof outdoor FRP/steel enclosures or containerized ISO modular units (20ft / 40ft) equipped with internal climate control and lighting.

River Water RO Purification System

 

Quality Assurance & Manufacturing Standards

Material Traceability

All pressure vessels, piping manifolds, and valves are supplied with mill test reports (MTR) verifying chemical composition.

 

Factory Acceptance Testing (FAT)

Each completed skid undergoes a 4-hour dry and wet functional test, verifying pump alignment, instrument calibration, and PLC logic response prior to crating.

Weld Inspection

Stainless steel process piping welds undergo argon back-purge welding, visual inspection, and periodic hydrostatic pressure testing at 1.5x maximum operating pressure.

Compliance Certifications

Electrical control panels are fabricated in accordance with UL 508A / CE standards. Components comply with ASME, NSF/ANSI 61, and ISO 9001 quality management protocols.

 

Commercial RO Purified Water System manufacturers

 

After-sales Technical Support

Remote Diagnostics: PLC panels equipped with secure ethernet ports allow remote troubleshooting and program updates by our engineering team.


Spare Parts Availability: Critical wear items—including O-rings, replacement membrane elements, cartridge filters, and pressure transmitters—are stocked for dispatch within 48 hours.


Documentation Package: Every unit ships with an English technical manual containing P&ID drawings, electrical schematics, instrument calibration certificates, and component maintenance data sheets.


[Download Sample P&ID & Datasheet Package PDF]


On-Site Commissioning Support: Virtual installation guidance is standard; experienced field service engineers are available for on-site commissioning and operator training upon request.

 

 

FAQ

 

Q: What is the required feed water quality to prevent rapid membrane fouling?

A: Recommended raw water parameters include a Silt Density Index (SDI-15) below 3.0, turbidity under 1.0 NTU, total organic carbon (TOC) below 3.0 mg/L, and zero free chlorine (<0.1 mg/L). Pre-treatment such as multimedia filtration, ultrafiltration (UF), or carbon adsorption must be installed upstream if raw water exceeds these limits.

Q: How is energy consumption calculated for this RO system?

A: Energy consumption typically ranges from 1.2 to 2.2 kWh per cubic meter of permeate produced, depending on feed water TDS, operating temperature, and membrane age. Systems equipped with energy recovery devices (ERD) or VFD-controlled pumps operate on the lower end of this range.

Q: What is the typical lifespan of the RO membrane elements?

A: Under normal operating conditions with proper pre-treatment and periodic clean-in-place (CIP) maintenance, spiral-wound polyamide membranes last between 3 to 5 years. Lifespan depends heavily on feed water chemistry control and adherence to chemical cleaning schedules.

Q: Can the system integrate with our existing plant SCADA network?

A: Yes. The standard Siemens PLC control panel supports industrial communication protocols including Modbus TCP, Ethernet/IP, and PROFIBUS, allowing seamless integration into plant-wide SCADA or distributed control systems (DCS).

Q: What electrical certifications do your control panels carry?

A: Standard electrical panels are built to CE specifications. For North American destinations, panels are fabricated to UL 508A standards with NEMA 4X or NEMA 12 enclosures, utilizing components meeting UL/CSA requirements.

Q: What information is required to receive an accurate technical proposal and quotation?

A: To size the system correctly, please provide: (1) Complete raw water laboratory analysis (TDS, ions, hardness, silica, SDI, pH), (2) Required permeate flow rate (GPM or m3/hr), (3) Required permeate water quality (conductivity or TDS limit), (4) Available electrical supply, and (5) Space limitations at your facility.

 

modular-1
Request a Quote

Ready to configure an industrial RO system for your plant? Submit your water analysis report and flow requirements to our engineering team.
Email: engineering@yourcompany-b2b.com
Direct RFQ Submission: [Link to Interactive RFQ Form / System Sizing Calculator]
Typical Response Time: Within 24 business hours with preliminary P&ID and technical proposal.

We're well-known as one of the leading ro purified water equipment manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy bulk ro purified water equipment made in China here from our factory. Customized orders are welcome.

automatic reverse osmosis system, Livestock Farm RO Water Purifier, automatic water purification machine
Send Inquiry
Send Inquiry